Spray and dip cleaners

Spritzreiniger mit Korrosionsschutz:





Westfalen SPN 1000
Liquid, mildly alkaline degreasing concentrate, removes heavy soiling from tools and parts. Suitable for application in washing machines and spray systems in the automotive industry and its suppliers. Application temperature: 45 to 50 ° C.


Westfalen SPN 1029
Liquid, neutral spray cleaner with very good corrosion protection for degreasing all metals above 20 ° C. The concentrate is dosed at 1.0 to 1.5%. For use in the automotive industry and its suppliers. The product is salt-free and contains no complexing agents.


Westfalen SPN 1038
Liquid, mildly alkaline, quick-release spray cleaner for ferrous materials with very good rust protection. The product can be used at temperatures above 30 ° C, but is preferably used in heat treatment plants before and after tempering. Application concentration: 1.5 to 2.0%.


Westfalen SPA 1096
Powdery, alkaline spray cleaner for use in repair shops for cleaning parts of iron, brass, copper and aluminium. Application temperature is 30 to 70 ° C. The product is dosed 0.5 to 1.5%.

Immersion cleaners


Westfalen TA 1039
Strong alkaline dip degreasing agent, in powder form, for ferrous and non-ferrous metals from 20 ° C. For removal of resinified drawing oils and greases, as well as for removal of drawing phosphate layers. The usual concentration is 3 to 5%. The cleaner also removes graphite and molykote.


Westfalen TA 1023
Powdery, alkaline dipping degreaser for cleaning iron, non-ferrous metals and aluminium. The product is suitable for cleaning processed parts with and without chips. The usual application concentration is 1 to 3%. The working temperature is between 40 and 60 ° C.


Westfalen TA 1028
Powdered, alkaline dipping degreaser for iron and steel in hardening plants. The cleaner is used in scouring and flooding systems. The application concentrate is 0.5 to 1.5%. Dipping temperature is usually 60 to 80 ° C

Ultrasound cleaners


Westfalen TN 1003
Liquid, mildly alkaline cleaning concentrate for removal of grinding and polishing residues on all metals. After the cleaning / rinsing process a hydrophobic film is applied to the treated parts. This protects the cleaned part from rapid corrosion. Application concentration is 2 to 4%. The bath temperature should not exceed 70 ° C, since the performance of the equipment decreases considerably when using ultrasound.


Westfalen TA 1023
Powdered, alkaline dipping degreaser for cleaning iron, non-ferrous metals and aluminium by ultrasonic methods. The product is suitable for removing grinding and polishing residues. The usual application concentration is 1 to 3%. The working temperature should be between 40 and 60 ° C. The treated workpieces are hydrophilic and can be wetted by water .

Electrolytic degreasing agents


Westfalen TA 1016
Powdery, strongly alkaline, low foaming product for electrolytic cleaning iron materials, copper, brass and die casted zinc. The product has excellent conductivity and can therefore be dosed with only 5%. For treatment of zinc die casting, we recommend lower concentrations.


Westfalen TA 1091
Powdery, strongly alkaline, low foaming product for electrolytic rust removal and descaling iron and steel. If the cleaner is used for rust removal and descaling, a concentration of 10 to 25% and a temperature up to 50 ° C must be used. For normal electrolytic degreasing the applicable dose is only 5%.

Caustic degreasers


Westfalen TS 1079
Liquid, acidic additive in caustic baths for galvanizing and a cleaning booster for all immersion cleaners. The high concentrate is usually added to 0.3 to 0.5% hydrochloric acid, phosphoric acid or sulfuric acid caustic bath.